Smooth, Silky Finish

Our quick and easy tip for today is:  Achieving a Smooth Silky Finish.

Supplies:
Sand Paper - Medium grit (120)
Sanding Block - fine grit 
Water
Brush
Paint
Baby Wipes

This is a simple easy to do method, and makes a big difference.

The smoother your paint finish, the nicer it will look when waxed.

First there's the finish on the project you're about to paint. If it's rough and worn, sand it to smooth out as much of the texture as possible. Sometimes this isn't easy, the old varnish has gotten that "Alligator" texture or there's chunks and major impressions in the finish. In order to get it really smooth, you may need to strip it. That is not an area that I don't know a lot about. We try not to purchase pieces that require stripping. To be honest, this is re-purposed furniture. Part of it's charm is the fact that it's been redone. 

Start by taking some sandpaper or a sanding block in a medium grit and try to remove as much of the old rough finish as possible. When you've got it to where you're comfortable with the smoothness, wipe it down with some baby wipes. You'll want to remove all the sanding dust before you start to paint.

Application of the paint can also make a big difference in the finished look. Long strokes, not short choppy ones. On my final coat of paint, I like to dip the "tips" of my brush into some water and let the wetness smooth out some of the lines. Once you've painted your piece and if desired - distressed it. Wipe it down again with the wipes. Let the moisture from the wipe dry. Run your hand over the paint, is it as smooth as you want?

If it's as smooth as you want, you can just apply your wax and finish up. If not, take your sanding block in the fine grit and gently rub it over your paint. You don't want to remove too much paint, the point is to just remove some of the brush lines and any other imperfections. Do this all over the piece until you have a nice smooth surface. When done, wipe with the baby wipes to remove all the sanding again, let the moisture dry and you're ready to apply your wax.

If at all possible, I like to wait until the next day to apply my wax. That allows time for all the moisture to evaporate from your paint layers. If you don't have the time to wait, put a fan on the piece for a little while.

Hope this helps, as always - call or come in if you have questions or a problem. We'll do our best to get you the answer.

Patti